Aprašymas
PERFORMANCE SPECIFICATIONS
Number of channels | 8 |
Output power (per channel) |
Single channel mode: 5200 W @ 2 Ω, 3000 W @ 4 Ω, 1600 W @ 8 Ω Bridge mode: 10400 W @ 4 Ω, 6000 W @ 8 Ω |
Max output voltage | 175 V peak |
Max output current | 130 A peak |
AC Main Power | Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC |
Operating voltage | 85 V – 440 V |
Operating temperature range | 0° – 35° C – 32° – 95° F |
Frequency response | 5 Hz – 30 kHz |
Noise floor | < -70.0 dBV |
Crosstalk separation | -70 dB |
THD+N | > 0.5% (typically > 0.01%) |
IMD | > 0.5% (typically > 0.01%) |
Input impedance | 20 kΩ balanced |
Slew rate | > 50 V/μs |
Damping factor | > 5000 @ 8 ohm, 20Hz – 500Hz |
DSP architecture | ARM Cortex A-8 processor and TI C6000 DSP platform |
AD Converter | Dual 24 bit 48 kHz Tandem® architecture with 129 dBA of dynamic range |
DA Converter | Dual 24 bit 48 kHz Tandem® architecture with 121 dBA of dynamic range |
Internal precision | 40 bit floating point |
Firmware | Network upgradable firmware |
Latency | 2.53 ms fixed latency architecture |
Input equalizer | Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass |
Output equalizer | Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass |
Crossover | Linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR) |
Delay | up to 2 s on input section; up to100 ms per output for time alignment |
Limiters | TruePower™, RMS voltage, RMS current, Peak limiter |
Damping control | Active DampingControl™ |
PHYSICAL
Input connector | 8 x XLR-F – Analog signal input 4 x XLR-F AES3 signal input |
Network connector | 2 x RJ45 port with Dante |
Output connector | 4 x speakON |
Height | 88 mm – 3 1/2″ |
Width | 483 mm – 19″ |
Depth | 495 mm – 19 1/2″ |
Weight | 24 kg – 52.9 lb |