Aprašymas

Powersoft Tech X8 Specifications:

• General:
  • Number of channels: 8
  • Output power:
    • Single channel mode:
      • 2 Ω: 5200 W
      • 4 Ω: 3000 W
      • 8 Ω: 1600 W
    • Bridge mode:
      • 4 Ω: 10400 W
      • 8 Ω: 6000 W
    • Max output voltage / current: 175 Vpeak / 130 Apeak
  • AC Main Power:
    • Power supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
    • Operating voltage: 85 V – 440 V
  • Thermal:
    • Operating temperature range: 32 °F – 113 °F (0 °C – 45 °C)
  • Audio:
    • Noise floor: -70 dBV (20 Hz – 20 kHz, A-weighted)
    • THD+N: < 0.5% (typically < 0.01%)
    • IMD: < 0.5% (typically < 0.01%)
    • Input impedance: 20 kΩ balanced
    • Slew rate: > 50 V/µs
    • Damping factor: > 5000 @ 8 Ω, 20 Hz – 500 Hz
  • DSP:
    • DSP architecture: ARM Cortex A-8 processor and TI C6000 DSP platform
    • AD Converter: Dual 24-bit 96 kHz Tandem® architecture with 127 dBA of dynamic range
    • DA Converter: Dual 24-bit 96 kHz Tandem® architecture with 122 dBA of dynamic range
    • Internal precision: 40-bit floating point
    • Firmware: Network upgradeable firmware
    • Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
    • Output equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
    • Crossover: Linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/octave to 48 dB/octave (IIR)
    • Delay: up to 4 s on input section; up to 200 ms per output for time-alignment
    • Limiters: TruePower™, RMS voltage, RMS current, Peak limiter
    • Damping control: Active DampingControl™
  • Dimensions (L x H x W): 19.0″ x 3.5″ x 19.5″ (483 x 88 x 495mm)